Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Indianapolis?
Chimney repair in Indianapolis typically runs $185 to $340 for a minor fix like a crown crack or a damaged cap, $600 to $1,800 for relining and resurfacing work, and $1,400 to $3,600 when the job involves structural masonry rebuilds, a firebox, or a leaking flashing detail at the roofline. Most single repairs land somewhere in the middle of that spread once we’ve looked inside the flue. The written estimate is what sets your final price – the ranges here are typical for the Indianapolis market in 2026, not a quote.
We’re Stellar Chimney Cleaning, and repair work is one of the three services we handle alongside chimney sweeping and dryer vent cleaning. Our technicians have up to 8 years of experience, and we work with the same professional-grade materials restoration contractors specify – DuraFlex liner systems, HeatShield ceramic resurfacing, and Gelco, Famco, Olympia Chimney and Copperfield caps and venting components. That matters for pricing, because the material you put back in the chimney often decides whether you’re looking at a small repair or a full reline.
Key takeaways
- A single minor repair: $185 to $340
- Liner resurfacing with HeatShield or a partial reline: $600 to $1,800
- Structural masonry or a full new liner: $1,400 to $3,600
- Dryer vent issues found at the same visit start around $125 to $250 to clean and correct
- Estimates are free, and the price is set per job in writing before any work starts
Chimney Repair Cost Breakdown (2026)
Here’s how the line items shake out for Indianapolis homeowners. Every chimney is different, so treat these as ranges that bracket the common jobs, not fixed prices.
| Repair type | Typical range | What it covers |
|---|---|---|
| Crown repair or rebuild | $240 – $650 | Sealing hairline cracks or rebuilding a crumbled crown so water stops running into the masonry |
| Chimney cap replacement | $185 – $425 | Removing a rusted or missing cap and fitting a Gelco or Famco cap sized to the flue |
| Flue tile repair | $300 – $900 | Replacing cracked flue tiles or spot-relining a short run |
| HeatShield resurfacing | $600 – $1,400 | Ceramic coating applied to a sound flue to seal joints and extend service life without a full reline |
| Full liner installation (DuraFlex) | $1,200 – $2,600 | A new stainless liner set inside the old flue, including insulation and a proper cap and top plate |
| Firebox repair | $450 – $1,500 | Rebuilding the firebrick and mortar in the firebox itself |
| Flashing repair at the roofline | $350 – $900 | Resetting or replacing the metal where the chimney meets the roof – the usual source of leaks |
| Masonry repair or rebuild | $1,400 – $3,600 | Rebuilding damaged brick courses, tuckpointing, and replacing spalled masonry |
| Dryer vent cleaning and correction | $125 – $250 | Clearing the vent run and fixing crushed or badly routed ducting |
What pushes a job toward the top of those ranges? Water damage that’s been working on the masonry for a while, a flue that’s been used after tiles cracked, and offset or oversized flues that need custom parts. What pushes it down? Catching a problem early. A crown crack that gets sealed this season is a $240 fix; the same crack after a few Indianapolis freeze-thaw winters often means a crown rebuild and some tuckpointing. The other big swing is access – a chimney on a steep roof or with a metal roof below it takes longer to work safely, and that time shows up in the labor line.
What Affects Chimney Repair Pricing in Indianapolis
Local conditions do more to move chimney prices here than most homeowners expect. Indianapolis sits in a climate with real freeze-thaw cycling through the cold months, and that single fact drives a lot of the repair work we’re called out for. Water gets into a small masonry crack, freezes, expands, and widens it; a few winters later that’s a crumbling crown or brick face. Understanding the drivers helps you read any estimate, ours or anyone else’s, with a clearer eye.
-
Freeze-thaw damage to masonry and crown. Brick and mortar that get wet and then freeze open up over time. Homes across Indianapolis – from Broad Ripple bungalows to the older brick stock in Irvington and Fountain Square – see this on south- and west-facing chimneys where sun and thaw hit hardest. Crown and masonry repairs tend to cluster on chimneys that haven’t been sealed or capped.
-
Which flue you’re running. A wood-burning fireplace, a gas insert and a wood stove each want a different liner setup. Gas appliances need a properly sized liner rated for the vent gases; wood needs a flue sized to the appliance. If a home has been converted from wood to gas without the flue being relined to suit, fixing it correctly changes the price.
-
Water getting in at the roofline. The flashing where the chimney passes through the roof is a common leak point. Re-doing it is a modest job, but if water has been running behind it for a season or two, you may be paying for masonry repair underneath as well.
-
Repair vs. replace the liner. A flue in decent shape with only joint gaps can often be resurfaced with HeatShield instead of getting a full new liner. That’s the single biggest cost decision on most repair estimates, and it’s why we look before we price. A flue with cracked or displaced tiles usually needs a full DuraFlex liner.
-
Access and roof type. A straightforward gable roof keeps labor down. A steep pitch, a tall chimney, or a metal roof underneath all add setup time because the technician has to work safely and slowly around the edge.
-
Parts availability. Caps, top plates and specialty fittings come in specific sizes. When a chimney needs a custom-sized cap or an unusual venting component, the part has to be ordered. Working across Gelco, Famco, Olympia Chimney and Copperfield means a wider parts ecosystem to pull from, which usually shortens the wait compared with a sweep-only operation that has to source everything fresh.
Why the Sweep and the Repair Shouldn’t Be Two Different Companies
Here’s the pattern we run into most: a homeowner books a sweep, gets a report that says “flue tiles cracked, recommend reline,” and then has to go find a mason or a chimney contractor to actually do the work – often waiting weeks and paying for a second inspection. We handle the sweep, the inspection and the repair as one relationship. “Clean it. Inspect it. Fix it.” is how we run it. When we’re already up on the roof with the flue open and a camera in it, pricing the fix is fast and the job can be scheduled without a second visit to look at the same problem.
That’s also why the material list matters. A repair is only worth the price if the parts last. We fit DuraFlex liners, cap chimneys with Gelco and Famco caps, use Olympia Chimney and Copperfield components where they’re the right fit, and use HeatShield ceramic resurfacing when it’s the smarter path than full replacement. Professional-grade materials, not generic substitutes – the goal is a repair built to last, not just to pass inspection. Fewer callbacks, and the chimney holds up through the next stretch of Indianapolis winters.
Our Indianapolis chimney repair work covers the whole system this way, from the firebox up to the cap.
How to Save on Chimney Repair
Chimney repairs reward catching them early, and there are a few practical ways to keep the bill in the lower half of the ranges above.
-
Get it looked at before it’s a problem. A cracked crown caught at a routine sweep is a small fix. The same crown after a season of water intrusion is a rebuild. Booking a sweep and inspection now is the cheapest insurance against a big repair later.
-
Keep a cap on the chimney. A good cap keeps rain, birds and debris out of the flue. It’s one of the least expensive parts on the list and one of the most effective at preventing the water damage that drives up repair costs. If your cap is missing or rusted through, that’s a same-day swap once a cap is sized.
-
Ask about resurfacing before a full reline. If the flue tiles are intact but the joints are failing, HeatShield resurfacing can extend the liner’s life at a fraction of the cost of a full replacement. It’s a repair path most sweep-only companies can’t offer, so it’s worth asking specifically whether your flue qualifies.
-
Bundle the sweep and the repair. When we’re already up there for a cleaning and inspection, you avoid paying for a second visit to diagnose the same chimney.
-
Get the estimate in writing before work starts. A clear written estimate that separates parts and labor keeps you from surprises. Ours are free. Call (888) 560-8179 for a free estimate, and we’ll price the job before anything is ordered.
Don’t Forget the Dryer Vent
Your dryer vent is a chimney too. It’s an exhaust system with the same job as a flue – carrying heat, moisture and lint out of the house – and it clogs the same way a chimney does. When lint builds up in the vent run, the dryer works harder and can’t exhaust safely. We treat dryer vent cleaning as a core service rather than an add-on, because the exhaust fire risk in a home doesn’t stop at the fireplace. If it’s been a while since the vent run was cleared, or you’ve noticed the dryer taking longer to dry a load, get it checked while the chimney gets its inspection. Both live with the same household exhaust system, and one call covers the whole system.
Safety: Why Some of This Isn’t a DIY Job
Some chimney problems can be spotted from inside the house – a cracked firebox brick, a loose damper, staining on the ceiling near the chimney. But the repairs themselves are another matter. Working on a roof, dealing with a flue that may have cracked tiles, and handling a firebox all involve real risk of fall or fire if done wrong or with the wrong materials. Gas-fired appliances carry an additional hazard: a liner that isn’t sized and sealed correctly for the vent gases can put the household at risk. We’d rather you let a trained technician handle anything that involves the roof, the flue interior or the gas appliance. A professional inspection tells you what’s actually wrong and what it costs to make right, and that’s a safer starting point than guessing from the hearth.
If you’re not sure whether your chimney needs work, a free estimate settles it. Call (888) 560-8179. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday.
FAQs – Chimney Repair Cost
How much does chimney repair cost in Indianapolis?
Most chimney repairs in Indianapolis fall between $185 and $1,800, with a single small fix like a crown crack or cap at the low end and relining or resurfacing work toward the top. Structural masonry jobs can run to $3,600. Call (888) 560-8179 for an exact quote on your chimney – estimates are free, and the written estimate sets the final price.
Is it cheaper to repair or replace a chimney liner?
A liner repair is usually cheaper: $600 to $1,400 for HeatShield resurfacing on a sound flue, against $1,200 to $2,600 for a full DuraFlex liner installation. Resurfacing only works if the tiles themselves are intact, though. Cracked or displaced tiles call for full replacement. An inspection tells you which one you’re facing. Call (888) 560-8179 for a free estimate before you decide.
How much does it cost to fix a leaking chimney?
Fixing a chimney leak typically runs $240 to $900. Most leaks come from two spots: the crown at the top (a crack that lets water into the masonry) or the flashing at the roofline where the chimney meets the shingles. A crown repair or flashing reset is on the lower end; repairing masonry that’s already taken on water runs higher. Call (888) 560-8179 and we’ll find the actual source and price the fix.
Can you come today?
Same-day service is often possible, and estimates are always free. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (888) 560-8179 to get on the schedule.
Why does chimney repair cost so much more in some cases than others?
The spread from $185 to $3,600 comes down to how much of the chimney is damaged and what it takes to fix it right. A crown crack is a quick, inexpensive fix. A chimney that’s been letting water in for several seasons often needs masonry repair, a new crown and possibly a reline – which multiplies the cost. Catching problems early is the single biggest factor in keeping the bill down. Call (888) 560-8179 for a free estimate and a straight answer on which category your chimney is in.
Frequently Asked Questions About Choosing a Chimney Repair Company
What should a chimney repair estimate include?
A good estimate breaks out the parts and the labor, names the materials being used, and describes exactly what’s being replaced or repaired. Ours does. We’ll tell you whether a repair gets you a full liner or a resurfacing, and what cap or venting components go on top. Call (888) 560-8179 for a free estimate, and we’ll walk you through it in plain terms.
Do you handle chimney repair and dryer vent cleaning together?
Yes – those are two of our three core service lines, along with chimney sweeping. When the chimney gets inspected, we can clear the dryer vent in the same visit so both household exhaust systems are handled at once. Call (888) 560-8179 to book both.
How do I know if I need a repair or just a cleaning?
A cleaning handles soot and creosote buildup; a repair handles damage. If you’re seeing cracked masonry, a loose cap, water stains near the chimney, or a damper that won’t close, it’s likely a repair. A sweep and inspection sorts out which one you’re dealing with. Call (888) 560-8179 for a free estimate.
What’s the safest way to get my chimney checked?
Have a trained technician inspect it, especially anything involving the flue interior, the roofline or a gas appliance. DIY work on a roof or inside a flue carries real risk. Our technicians have up to 8 years of experience and work with professional-grade materials. Call (888) 560-8179. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Get a Free Chimney Repair Estimate in Indianapolis
Chimney repair pricing in Indianapolis runs from a couple hundred dollars for a small fix to a few thousand for structural work, and the only way to know which side of that you’re on is to have the chimney looked at. We clean, inspect and repair in one relationship, so you don’t get a report and then have to find a second company. One call covers the whole system – chimney, flue and dryer vent. Call (888) 560-8179 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. For our full range of chimney services, see Stellar Chimney Cleaning.
Pricing reflects the Indianapolis market as of 2026. Stellar Chimney Cleaning offers free estimates – call (888) 560-8179.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Erin Hoffman"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Dustin Hayes"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Megan Ziegler